China Cheap price 12 Core Multimode Fiber Optic Cable Price - Special Optical Fiber- Wasin Fujikura High Temperature Resistant Optical Fiber – Wasin Fujikura Wasin Fujikura
China Cheap price 12 Core Multimode Fiber Optic Cable Price - Special Optical Fiber- Wasin Fujikura High Temperature Resistant Optical Fiber – Wasin Fujikura Detail:
Nanjing Wasin Fujikura high temperature resistant optical fibers have good optical properties, excellent dynamic fatigue properties and high tensile strength under high temperature conditions.Wasin Fujikura has two series of high temperature resistant fibers, at 200 degrees and 350 degrees
Feature
► Good high temperature performance
► Stability performance under Continuous cycle of intense low-temperature and high temperature (down to -55 ° C up to 300 ° C)
► Low loss, wide band (from near ultraviolet to near infrared band, 400nm to 1600nm)
► Good resistance to optical damage ability
► 100KPSI strength level
► Process is flexible and can be customized to realize different geometry, fiber profile structure, NA, and so on.
Maximum working temperature at 200 degrees
| The polyacrylic resin as coating | |||
| Parameter | HTMF | HTHF | HTSF |
| Cladding diameter (um) | 50±2.5 | 62.5±2.5 | - |
| Cladding diameter (um) | 125±1.0 | 125±1.0 | 125±1.0 |
| Cladding non-circularity (%) | ≤1 | ≤1 | ≤1 |
| Core / cladding concentricity (um) | ≤2 | ≤2 | ≤0.8 |
| Coating diameter (um) | 245±10 | 245±10 | 245±10 |
| Coating / cladding concentricity (um) | ≤12 | ≤12 | ≤12 |
| Numerical Aperture (NA) | 0.200±0.015 | 0.275±0.015 | - |
| Mode field diameter (um) @1310nm | - | - | 9.2±0.4 |
| Mode field diameter (um) @1550nm | - | - | 10.4±0.8 |
| Bandwidth(MHz.km) @850nm | ≥300 | ≥160 | - |
| Bandwidth(MHz.km) @1300nm | ≥300 | ≥300 | - |
| Proof teet level (kpsi) | 100 | 100 | 100 |
| Operating temperature range (°C) | -55 to +200 | -55 to +200 | -55 to +200 |
| Short-term (°C)( In two days) | 200 | 200 | 200 |
| Long-term (°C) | 150 | 150 | 150 |
| Attenuation (dB/km) @1550nm | - | - | ≤0.25 |
| Attenuation (dB/km) | ≤0.7 @1300nm | ≤0.8 @1300nm | ≤0.35@1310nm |
| Attenuation (dB/km) @850nm | ≤2.8 | ≤3.0 | - |
| Cutoff wavelength | - | - | ≤ 1290nm |
Maximum working temperature at 350 degrees
| The polyimide as coating | |||
| Parameter | HTMF | HTHF | HTSF |
| Cladding diameter(um) | 50±2.5 | 62.5±2.5 | - |
| Cladding diameter(um) | 125±1.0 | 125±1.0 | 125±1.0 |
| Cladding non-circularity(%) | ≤1 | ≤1 | ≤1 |
| Core / cladding concentricity(um) | ≤2.0 | ≤2.0 | ≤0.8 |
| Coating diameter(um) | 155±15 | 155±15 | 155±15 |
| Coating / cladding concentricity(um) | 10 | 10 | 10 |
| Numerical Aperture(NA) | 0.200±0.015 | 0.275±0.015 | - |
| Mode field diameter (um) @1310nm | - | - | 9.2±0.4 |
| Mode field diameter (um) @1550nm | - | - | 10.4±0.8 |
| Bandwidth(MHz.km) @850nm | ≥300 | ≥160 | - |
| Bandwidth(MHz.km) @1300nm | ≥300 | ≥300 | - |
| Proof teet level(kpsi) | 100 | 100 | 100 |
| Operating temperature range(°C) | -55 to+350 | -55 to+350 | -55 to+350 |
| Short-term (°C)( In two days) | 350 | 350 | 350 |
| Long-term (°C) | 300 | 300 | 300 |
| Attenuation(dB/km) @1550nm | - | - | 0.27 |
| Attenuation(dB/km) | ≤1.2 @1300nm | ≤1.4@1300nm | ≤0.45@1310nm |
| Attenuation(dB/km) @850nm | ≤3.2 | ≤3.7 | - |
| Cutoff wavelength | - | - | ≤1290 nm |
Attenuation test, winding the fiber at a disk with diameter larger than 35cm by 1 ~ 2g tensions
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of China Cheap price 12 Core Multimode Fiber Optic Cable Price - Special Optical Fiber- Wasin Fujikura High Temperature Resistant Optical Fiber – Wasin Fujikura , The product will supply to all over the world, such as: Costa Rica, Turkmenistan, Cambodia, The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
By Janice from Latvia - 2018.05.15 10:52
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Olga from Montreal - 2018.07.12 12:19
Write your message here and send it to us
Products categories
-
Professional China Copper Fiber Composite Cable...
-
Factory selling Opgw Splicing - Singlemode Fib...
-
High Quality for Fiber Optic Clamp - Singlemod...
-
China Cheap price 12 Core Multimode Fiber Optic...
-
OEM Manufacturer Dead End Clamp Manufacturers -...
-
OEM Manufacturer Figure 8 Fiber Cable - Single...